xiQ - Technical Manual Version 1.0
28
3.5.3.4.
Mechanical drawings (CS-mount [without C/CS mount module B])
figure 3-14, mechanical drawing MQ013xG-ON, CS-Mount housing
3.5.3.5.
Camera orientation
Please note that the camera orientation of the MQ013xG-ON models are different. The USB 3.0 connector is at the upper side of
the camera. Please see the next figure:
Figure 3-15, MQ013xG-ON, camera orientation
3.5.3.6.
Referenced documents
Onsemi Datasheet VITA1300-datasheet-Rev. 8 (July 2012)
3.5.3.7.
Sensor features
feature
Note
Binning
Not implemented
Skipping
Yes, 2x2 binning supported
ROI
1 ROI with free parameters supported
(x coordinates multiple of 16, y coordinates multiple of 2)
HW Trigger
Trigger with overlap usable (see
4.3.2.4 Triggered mode with overlap
HDR
Knee point based HDR (beta stage), see
4.4.9 HDR – Not implemented, yet
table 3-12, sensor features available
PN: MQ013MG-ON
13200250
Isol ated I/O 24V 20mA max.
For use with XIMEAapproved connection cables onl
y.
5V
(<1.5W)
Based on the USB-IF ’s USB 3.0 specific ation.
USB 3.0 SuperSpeed
M
ad
e
in
E
U
STATUS 1
STATUS 2
POWER
INPUT