xiQ - Technical Manual Version 1.0
90
5.6.6.
xiAPI Auto Bandwidth Calculation
xiAPI uses Auto Bandwidth Calculation (ABC) before the opening of each camera by default. After the measurement,90% of the
measured value is used as the maximum allowed transfer speed of the camera to ensure the stability of transfer.
It is important to set this parameter to XI_OFF to ensure highest possible data transfer speed.
To disable ABC, the application should set parameter XI_PRM_AUTO_BANDWIDTH_CALCULATION to XI_OFF before the first
xiOpenDevice is used. This setting disabled ABC and the camera stream is not limited.
5.6.7.
USB3 Vision
For more information on programing according the USB3 VISION standard, please visit the standard’s website at
http://www.visiononline.org/vision-standards-details.cfm?type=11
5.6.8.
GenICam
For more information on programing according the GenICam standard, please visit the standard’s website at
http://www.emva.org/cms/index.php?idcat=27