Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual Download Page 10

Page: 10 / 61

VCU1287 IBERT Getting Started Guide

UG1203 (v2016.4) December 15. 2016

www.xilinx.com

Chapter 1:

VCU1287 IBERT Getting Started Guide

Attach the GTH Quad Connector

Before connecting the Bulls Eye cable assembly to the board, firmly secure the blue

elastomer seal provided with the cable assembly to the bottom of the connector housing if

it is not already inserted (see

Figure 1-4

Note:

Figure 1-4

is for reference only and might not reflect the current version of the connector.

Attach the Samtec Bulls Eye connector to GTH Quad 224 (

Figure 1-5

), aligning the two

indexing pins on the bottom of the connector with the guide holes on the board. Hold the

connector flush with the board and fasten it by tightening the two captive screws.

X-Ref Target - Figure 1-4

Figure 1-4:

Bulls Eye Connector with Elastomer Seal

X-Ref Target - Figure 1-5

Figure 1-5:

Bulls Eye Connector Attached to Quad 224

X15543-121416

X15544-121416

Send Feedback

Summary of Contents for Virtex UltraScale FPGA VCU1287






























































Search results

Summary of Contents for Virtex UltraScale FPGA VCU1287

Reviews:

Related manuals for Virtex UltraScale FPGA VCU1287

Brands by name

Popular brands

Xilinx Virtex UltraScale FPGA VCU1287, Getting Started Manual

Search results

Summary of Contents for Virtex UltraScale FPGA VCU1287

Reviews:

Related manuals for Virtex UltraScale FPGA VCU1287

Brands by name

Popular brands