Virtex-6 FPGA Connectivity Kit Getting Started
69
UG664 (v1.4) July 6, 2011
Getting Started with the Virtex-6 FPGA IBERT Reference Design
6.
Board Setup V – Connect the power connector:
a.
Using the included power supply, connect the power supply connector to the
ML605 board as shown in
.
b. The power switch SW2 should be switched to the ON position
.
X-Ref Target - Figure 70
Figure 70:
Powering Up the ML605 Board
UG664_47_011710
Summary of Contents for Virtex-6 FPGA
Page 1: ...Virtex 6 FPGA Connectivity Kit Getting Started Guide UG664 v1 4 July 6 2011 XPN 0402826 03...
Page 4: ...Virtex 6 FPGA Connectivity Kit Getting Started www xilinx com UG664 v1 4 July 6 2011...
Page 6: ...6 www xilinx com Virtex 6 FPGA Connectivity Kit Getting Started UG664 v1 4 July 6 2011...
