![background image](http://html.mh-extra.com/html/pentair/raychem-frostguard/raychem-frostguard_installation-instructions-manual_1524314001.webp)
1 / 8
FrostGuard 120 V
120 V PREASSEMBLED ELECTRIC HEATING CABLES FOR PIPE FREEZE PROTECTION AND ROOF &
GUTTER DE-ICING INSTALLATION INSTRUCTIONS
THERMAL BUILDING SOLUTIONS
EN-RaychemFrostGuard120V-IM-H59486 05/16
Pipe Freeze Protection
Roof and gutter de-icing: standard roof
Roof and gutter de-icing: standing seam metal roof
DESCRIPTION
FrostGuard 120 V preassembled self-regulating heating cables are
designed for residential and light commercial metal and plastic pipe
freeze protection and roof & gutter de-icing applications. FrostGuard
120 V heating cables are available in 6, 12, 18, 24, 36, 50, 75 and 100
foot lengths, and each comes assembled with a 6-ft power cord and
lighted plug.
KIT CONTENTS
1 FrostGuard preassembled electric heating cable
2 Roof and gutter labels
2 Pipe labels
ADDITIONAL ITEMS REQUIRED BUT NOT SUPPLIED FOR
PIPE APPLICATIONS
• Ground-fault protected outlet (GFCI)
• Waterproof thermal insulation (e.g. preformed foam)
• Raychem H903 Application Tape and Electric Traced Labels
ADDITIONAL ITEMS REQUIRED BUT NOT SUPPLIED FOR
ROOF & GUTTER APPLICATIONS
• Raychem H913/H914 Roof Clips (10 clips for each 7 linear feet of
roof edge)
• Raychem H915 Hanger Bracket (1 for each downspout, 2 if looping)
• UV Resistant cable ties
• Ground-fault protected outlet (GFCI)
APPROVALS
-WS
FIRE AND SHOCK HAZARD
. This product is an electrical device
that must be installed correctly to ensure proper operation and to
prevent shock or fire. Read these important warnings and carefully
follow all the installation instructions.
• To minimize the danger of fire from sustained electrical arcing
if the heating cable is damaged or improperly installed, and
to comply with the requirements of Pentair Thermal Building
Solutions agency certifications, and national electrical codes,
ground-fault equipment protection must be used on each
heating cable branch circuit. Arcing may not be stopped by
conventional circuit protection.
• For pipe freeze protection applications, use only fire-resistant
insulation materials such as preformed foam or fiberglass.
• Do not damage the heating cable and power cord or plug.
Remove any damaged cables from service immediately.
• Do not use any wire or metal clamps to attach the cable to the
pipe. Use tape (1/2 inch wide to 1 inch wide) or plastic cable ties.
• Do not install the heating cable underneath any roof covering
for roof and gutter de-icing.
• Leave these installation instructions with the user for future
reference.
WARNING: