![background image](http://html1.mh-extra.com/html/xilinx/t1/t1_installation-manual_3394255036.webp)
Figure 9: Connected ADK Ribbon Cable Backside
To complete the setup, connect the ribbon cable to the ADK card, then connect the ADK card to
a micro USB cable so that it can connect to a computer that can run the Xilinx tools. The full
connection is shown below.
Appendix A: Programming the Devices Using JTAG
UG1518 (v1.0) December 17, 2021
T1 Telco Accelerator Card Installation Guide
36