Solarflare X2552 network adapter Quick Start Guide
Issue 1
© Copyright 2019 Xilinx, Inc
7
1.4 Warnings
Changes or modifications not expressly approved by Solarflare Communications
Inc., the party responsible for FCC compliance, could void the user's authority to
operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Warning: This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
Underwriters Laboratory Inc ('UL') has not tested the performance or reliability of
the security or signaling aspects of this product. UL has only tested for fire, shock or
casualty hazards as outlined in the UL's Standard for Safety UL 60950-1 and
additionally UL 62368-1.
UL Certification does not cover the performance or
reliability of the security or signaling aspects of this product. UL makes no
representations, warranties or certifications whatsoever regarding the
performance or reliability of any security or signaling related functions of this
product.
The laser safety of this product has been verified using the following certified laser
device module (LDM). Refer to the manufacturer documentation for test
certification details:
When installed in a >10Gb Ethernet network interface card from the Solarflare X2
series, the laser emission levels remain under Class I limits as specified in the FDA
regulations for lasers, 21 CFR Part 1040.
The decision on what LDMs to use is made by the installer. For example, equipment
may use one of a multiple of different LDMs depending on path length of the laser
communication signal. This equipment is not basic consumer ITE.
This equipment is installed and maintained by qualified staff from the end user
communications company or subcontractor of the end user organization. The end
product user and/or installer are solely responsible for ensuring that the correct
devices are utilized in the equipment and the equipment with LDMs installed
complies with applicable laser safety requirements.
Do not install this product in hazardous areas where highly combustible or explosive
products are stored or used without taking additional safety precautions. Do not
expose this product to rain or moisture. This product is intended only to be powered
by an ES1, PS2 power source.
Manufacturer
Model
Finisar Corporation
FTLX8574D3BCL-SL
Lumentum Operations
PLRXPL-SC-S43-SF
