background image

CAN Getting Started Guide

www.xilinx.com

23

UG186 April 19, 2010

Implementation Scripts

Implementation Scripts

Note:

Present only with a Full license. 

The implementation script is either a shell script(.sh) or batch file (.bat) that processes the 
example design through the Xilinx tool flow. It is located at:

Linux

<project_dir>/<component_name>/implement/implement.sh

Windows

<project_dir>/<component_name>/implement/implement.bat

When the CORE Generator software is run with the Full System Hardware Evaluation, or 
Full license types, the implement script performs the following steps:

Synthesizes the HDL example design files using XST

Runs NGDBuild to consolidate the core netlist and the example design netlist into the 
NGD file containing the entire design

Maps the design to the target technology

Place-and-routes the design on the target device

Performs static timing analysis on the routed design using Timing Analyzer (TRCE)

Generates a bitstream

Enables Netgen to run on the routed design to generate a VHDL or Verilog netlist (as 
appropriate for the Design Entry project setting) and timing information in the form 
of SDF files

The Xilinx tool flow generates several output and report files. These are saved in the 
following directory which is created by the implement script:

<project_dir>/<component_name>/implement/results

Simulation Scripts

Functional Simulation

The test scripts are ModelSim macros that automate the simulation of the test bench. They 
are available from the following location: 

<project_dir>/<component_name>/simulation/functional/

The test script performs the following tasks:

Compiles the structural UniSim simulation model

Compiles HDL Example Design source code

Compiles the demonstration test bench

Starts a simulation of the test bench

Opens a Wave window and adds signals of interest (wave_mti.do/wave_ncsim.sv)

Runs the simulation to completion

Summary of Contents for LogiCORE IP CAN 3.2





























Reviews: