12
KC705 Getting Started Guide
UG913 (v4.1.1) March 7, 2014
Chapter 1:
Getting Started with the Kintex-7 FPGA KC705 Embedded Kit
3.
Open a command shell with the Xilinx Design tools environment settings. Refer to
Appendix B, Installation and Licensing of Xilinx Design Tools
for Xilinx tool chain
installation and licensing help.
Note:
To set environment variables, run the
settings32.bat
file located in the Xilinx
installation area. At the command prompt, type
C:\Xilinx\Vivado\2013.x\settings32.bat
(for Windows XP) or
C:\Xilinx\Vivado\2013.x\settings64.bat
(for Windows 7) and press
Enter
.
4.
Go to the unzipped directory of the demonstration package and execute these
commands to download the design and connect to the MicroBlaze processor:
$ cd k7-embedded-trd-rdf0283/ready_to_test/
$ xmd
XMD% fpga -f video_demo.bit
This command downloads the hardware bitstream into the FPGA but does not
download the software application:
XMD% connect mb mdm
This command connects to the MicroBlaze processor debug module:
XMD% dow Video_Demo.elf
XMD% con
