8
Note: DHCP enabled Router/switch gear should be turned on first, with all Ethernet cables
connected to the hardware prior to Powering ON the hardware. This will allow for proper IP
address distribution to the Hardware.
First, Power ON the router/switch gear.
Then connect an Ethernet cable from the host computer to the DHCP enabled router.
C
onnect an Ethernet cable from the router to the Solaro device.
Then connect the external power supply to the Solaro device.
Switch ON the processor device.
A) Connecting using a DHCP enabled router/server
B) Non-DHCP direct connection or indirect connection
Non-DHCP connections are not automatic.
Non-DHCP connections must be manually configu
red.
Please refer to
Xilica Designer help file or
Xilica FAQ for further assistance.
