Xilica Audio Design XD-8080M, User Manual

Page: 14 / 21

14
Operating the System menu
The System menu allows the user to control and change parameters that are related to the system behaviour
and general operation. It can be accessed by pressing the Sys key in the main menu. (When no input/output
or System menu is activated). All system menus require pressing the Enter key to confirm and save settings.
Preset recall
The XD has a built-in non-volatile memory that can store up to 30 different preset set-ups.
PRESET
This control selects which program to recall from the non-volatile memory. The program name is displayed to
the right of the program #.
NAME
This shows the name of the program. This is read-only. The user has no access to them.
Preset store
The XD has a built-in non-volatile memory that can store up to 30 different program (or preset) set-ups. A
program can be stored using this menu. The old program with the same program number will be replaced.
Once the program is stored in the flash memory, it can be recalled at a later time, even after power down.
PROG
This control selects which location in the non-volatile memory to save the program to.
NAME
A descriptive name of up to twelve characters can be assigned to each program.
SYSTEM-SETUP MENU: Recall
PRESET: 1
NAME: __________
SYSTEM-SETUP MENU: Store
PRESET: 1
NAME: __________
XD Series: System menu