Xilica Audio Design XD-8080M, User Manual

Page: 10 / 21

10
Input/output equalizer
EQ#
Each input channel has 8 bands of equalization. This control selects one of the 8 available bands.
BYP
This control will un-bypass (Off) or Bypass (On) the currently selected band.
TYP
The five types of EQ that can be used are: parametric (PEQ), low shelf (LO-SHF), high shelf (HI-SHF), first
degree all-pass (AP-1), and second degree all-pass (AP-2).
FRQ
The EQ centre frequency ranges from 20Hz to 30kHz in either 1Hz steps or 1/36 octave steps. The frequency
steps can be selected in the
System Menu. Please refer to Page 14.
BW
The EQ bandwidth ranges from 0.02 to 3.61 octaves in steps of 0.01 octave. The equivalent Q value is
automatically shown besides the octave value. For first degree all-pass (AP-1) filter, the bandwidth will set the
phase shift at the centre frequency. The phase shift is gradually changed from 180 degrees above the centre
frequency to the specified value.
LVL
The EQ level (or gain) ranges from -30dB to +15dB in 0.25dB steps.
IN_1: _______ MENU: EQ
EQ#:1
FRQ:1000Hz
BYP: Off BW: 0.33 Q=4.36
TYP: PEQ LVL:0.00dB
IN_1: _______ MENU: EQ
EQ#:1
FRQ:1000Hz
BYP: Off DEG: 15.5 deg
TYP: PEQ LVL:0.00dB
Input graphic equalizer
GEQ#
The graphic equalizer has 31 bands of equalization from 20Hz to 20kHz. This control selects one of the 31
available bands. The frequency corresponding to each band is also shown.
LEVEL
The GEQ level (or gain) ranges from -30dB to +15dB in 0.25dB steps.
BYPASS
This control will un-bypass (Off) or bypass (On) the entire GEQ for this channel.
IN_1: _______ MENU: GEQ
GEQ#:1
(f=20Hz)
LEVEL: +0.25dB
BYPASS: Off
XD Series: Channel menu