27
Map device(s)/Online mode
Note: your devices must be connected, online and operational to go online.
1.
Right click each module in the Project View work area. Select “Map Physical Device”.
2.
Select the specific device model from the drop down list.
Save project
‘Save’ your project by clicking the ‘File’ tab at the top left of the software and ‘Save’.
Or ‘save’ your project using the save icon at the top right of the software.
3.
Once done, each mapped module in the work area is a solid grey color to indicate successful
mapping.
Note: This saves the Mini programming and DSP design to your computer but not to the physical Mini device
itself. (See page 9: ‘Going Online’)
We recommend backing up the project file in an external location.
NeuPanel: Online mode
