8
Interface Definition
Microphone port
Definition of ACC interface
Connection of S/P Port
Definition of I/Q OUT interface
Connection of KEY Port
Connect manual/automatic tapper according to
the schematic diagram shown in the right figure.
Note :
●
If the connector of the manual tapper is a
6.5mm 2-core plug, please change it to a 3-core
3.5mm stereo plug according to the wiring
method shown in the right figure, and connect the
trigger end of the electric key to the "Di" or "Da"
terminal.
●
Take care that direct use of the 2-core to
3-core adapter or incorrect wiring may result
the radio in CW transmission status all the
time.
●
Using plugs of other specifications may damage the socket.
●
X6100 may switch to transmitting mode if plugging in or unplugging the tapper plug when it is
working.
●
Please cut off the power supply of X6100 before connecting or disconnecting the tapper.
Di
Di
Da
Da
Com
mon
Com
mon
