Operation
Channel Memory MW and Clear MC
Basic operations:
1. In VFO mode, adjust the required frequency, mode, advanced function status and other parameters.
2. Press [MW/MC] key in a short time and the CH 00 (channel number) character will appear on the
screen and flash. Rotate the main knob to select an empty channel. At this time, the character E will
appear after the channel number, indicating that the channel is empty and can be used for memory.
3. Press [MC/MC] key again in a short time to save the current set frequency information to the selected
channel.
Call the memory channel:
1. In VFO mode, press the [VM] key on the panel in a short time to enter channel mode;
2. Rotate the main knob to switch the current channel.
Clear the channel memory:
1. In channel mode, press the combination key [FUNC] + [MW/MC], at this time, the channel number
starts to flash;
2. Rotate the main knob to the channel to be cleared. Press [MW/MC] key again to clear the selected
channel.
-----------------------------------------------------------------------------------------------
Transmitting Power Setting
1. Press [POW] key in a short time to enter power setting state, and the function display area on the right
side of the screen will display the Po power setting value.
2. Rotate the [Multi-Function Adjustment Knob] to set the power, with the stepping of 1W.
♦
Please minimize the preset transmitting power when the G90S radio is used for the first time under the
condition of not understanding the current state of antenna.
POW key
27
