Operation
♦
VFOA/B can be fully used to set different frequencies and modes
,
so as to
quickly switch the two frequency points in real time.
-----------------------------------------------------------------------------------------------
Automatic Gain Control (AGC)
Select appropriate AGC control parameters in different work modes to achieve a
good receiving effect.
1. Press [AGC] key at the bottom of the screen in a short time, enable/ disable or
select different AGC modes and circulate them in the following order:
AGC-
S → AGC
-
F → AGC
-
A → AGC
--
AGC-S: Slow AGC control
Recommended settings
:
AM mode: AGC-S
AGC-F: Fast AGC control
SSB/CW mode: AGC-F
AGC-A: Automatic AGC control
AGC--: AGC disable
2. When the AGC-A mode is selected, the radio will automatically select the
appropriate AGC control parameter according to the current work mode.
■
After AGC is disabled, the receiver will be in the maximum gain state and
noise received will be significantly increased.
20
