Operation
Press in a short time: Enter the receiving filter mode to select.
Long press: Enter the user defined function menu, rotate the main knob to select
the corresponding function, and press the SAVE key at the bottom of the screen
in a short time to select the function. At this point, the function is set to the
[Multi-function adjustment knob].
Functions that can be customized
are as follows:
1) Freq 100k
100kHz stepping
2) SQL Level
Muting setting
3) Po Level
Transmitting power setting
4) Key Speed
Automatic key rate setting
5) FFT Scale
Spectrum reference level
setting
-----------------------------------------------------------------------------------------------
Pilot Frequency Receiving and Sending Operation SPL and VFOA/B
Settings
G90S transceiver has two
built-in independent VFOs which can
respectively set differ tent frequencies
and modes. Cooperated with SPL
function, it can conveniently achieve
pilot frequency receiving and sending
operations
.
VFO setting:
1. Press [A/B / A>B] key in a short time to switch between VFO-A and VFO-B;
2. Set current VFO working frequency and mode while switching to a certain
VFO state.
Pilot frequency receiving and sending SPL operation methods:
1. Set received frequency and mode (VFO-A) firstly;
2. Set transmitting frequency and mode (VFO-B);
3. Operate the second function of the [AGC/SPL], turn on the SPL function to
enable the pilot frequency transceiver mode and the double-triangular icon will
also display on the VFO area of the screen.
VFO operation
Pilot Frequency Operation
Multi-function Adjustment Knob
19
