Rev 1.2 | February, 2022
9
WET LOCATION
DC ONLY
XFL Flexible Linear LED Light Installation Instructions
1
WIRING AND CONNECTION OPTIONS
• Light strip power (off / on) can be controlled using a
wall-mounted switch.
Power supply
24V DC
Wall
switch
Switched
AC outlet
• After attaching mounting clips, attach the snap-in lens
to the channel to protect XFL product and diffuse
the light.
• Remove protective film from surface of diffuser lens.
Protective lens film
Mounting channel
Lens
• Remove adhesive backing starting at one end of XFL product
• Remove backing slowly while adhering XFL product to
mounting channel, making sure not to wrinkle XFL product.
• After removing backing and adhering XFL product to
mounting channel, press firmly to ensure proper adhesion.
Adhesive backing
Do not wrinkle
• Use electric drill and/or screwdriver to install mounting
clips as shown.
• Using mounting clips in addition to the XFL adhesive is
optional, but may be needed depending on the specific
mounting location as well as installer’s judgment.
1
USING MOUNTING CLIPS
2
3