Rev 1.2 | February, 2022
8
WET LOCATION
DC ONLY
XFL Flexible Linear LED Light Installation Instructions
• If surface is electrically conductive, isolation between soldering points and mounting surface is necessary.
• Do not install LED tape in a location with direct exposure to the sun or where the operating or storage
temperature is outside the listed temperature range of the product.
• Although XFL products can be installed in curved and irregular spaces, avoid sharp bends or bending on
the solder joints as you could damage the light strip. If an LED is inadvertently damaged and fails to light,
the remaining LEDs will continue to operate.
MOUNTING OPTIONS
Contactt Here
Soldered Contacts
• There are multiple options for connecting XFL. The
procedure at right illustrates how to connect strips using
solderless strip-to-wire connectors.
• Strip-to-wire and strip-to-strip connectors are available for
all XFL products. Compatible connectors must be
selected for specific XFL product type.
• Though solderless connections are generally easier to
use than soldering contacts, in some circumstances,
soldering contacts may be necessary. For procedures
such as soldering and splicing, it is recommended that
basic wiring techniques are followed.
USING SOLDERLESS CONNECTORS
• Another option for quick, easy and flexible connection
between LED light strips is the light strip interconnect,
shown at right.
• Interconnects are a useful option in applications where you
want to easily join light strips over separated surfaces.
USING STRIP INTERCONNECTS