background image

Hereby, Tiinlab declares that the radio equipment type TWSEJ10WM is in compliance with 

Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the 

following internet address:  http://www.mi.com/global/service/support/declaration.html

Safety Caution

· Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.

· Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, 

  explosion, leakage of corrosive electrolyte etc).

· Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that 

  can result in an explosion.

· Leaving a battery in an extremely high temperature surrounding environment that can result in an 

  explosion or the leakage of flammable liquid or gas.

· A battery subjected to extremely low air pressure that may result in an explosion or the leakage of 

  flammable liquid or gas.

· Risk of explosion if battery is replaced by an incorrect type.

· Dispose of used batteries according to the instructions.

· The product operation maximum ambient temperature is 40°C.

WARNING: 

 To avoid risk of fire, please just connect the product to a power supply of which output 

complies with requirements of PS1 defined in IEC/EN/UL 62368 standards (output capability is less 

than 15W).

08

Summary of Contents for Tiinlab TWSEJ10WM










Reviews: