13
Image Focus
Keystone Correction
Go to Settings > Projector > Focus and select Execute Focus, the
screen will focus and once it is finished you can press the left or
right button on the remote control for further fine-tuning.
If there is any issue with Instant Focus, you can go to Settings >
Projector > Focus to select Instant Focus Calibration, and follow
the instructions to complete the Instant Focus Calibration.
Go to Settings > Projector > Focus and select the Auto Focus
switch, when it is enabled, moving the projector will automatically
trigger the screen to focus, and you can also change the Auto
Focus Method between Camera Focus and Instant Focus.
If the projector is moved, it will start automatic keystone
correction and the projected image will be adjusted
automatically.
Note: Go to Settings > Projector > Keystone Correction, to
configure Auto Keystone. Auto Keystone is enabled by default.
Go to Settings > Projector > Keystone Correction > Keystone
Correction, and use the up and down buttons to select Quick
Adjustment, Fine Tuning, and Reset, then press the OK button
to enter the correction mode.
Quick Adjustment
Fine Tuning
Reset
