Xiaomi Mi Smart Standing Fan 2, User Manual

Page: 4 / 13

2
Read this manual carefully before use, and retain it for future reference.
Safety Instructions
PRECAUTIONS
To avoid electric shocks, fire, personal injury, or other damage,
please strictly follow the installation steps instructed by the user
manual, and make sure the fan base is assembled in the last step.
Do not connect the fan to the electrical outlet until it is fully assembled.
Transportation
Installation
Firmly hold the fan stand to avoid it from falling down and causing
personal injury.
Turn off and unplug the fan before moving it.
Using the Fan
Do not lean on or tilt the fan while it is running.
Do not shake the fan's head repeatedly so as to avoid damage to the
internal mechanism.
Immediately stop using the fan if it makes unusual sounds, gives
off bad odors, overheats, or rotates irregularly.
Power Cord
Always unplug the fan by pulling the power plug rather than the cord.
Disconnect the fan from the electrical outlet before doing
maintenance or moving it.
When the power cord is damaged, it must be replaced with a genuine
one purchased from the manufacturer or after-sales service department.
Ensure that the fan is switched off from the supply mains
before removing the guard.
Under normal use of condition, this equipment should be kept a
separation distance of at least 20cm between the antenna and
the body of the user.
When maintaining and cleaning, disassemble the fan base before
removing other parts. Make sure you install the fan base last
when assembling the fan.
Do not strike, crush, and drop the product, or expose it to pressure.
If the supply cord is damaged, it must be replaced by a
special cord or assembly available from the manufacturer or
its service agent.
Keep the product away from water and heat sources.
Do not use this product in environments where the temperatures
and humidity are extremely high. Avoid direct sunlight.