15
16
is the registered trademark of MI Technology Co., Ltd. (hereinafter referred to as MI Company). All rights reserved to
the trademark . Other trademarks mentioned in the manual may be the registered trademarks of the owner. Naenbo,
Ninebot, No. 9 and other trademarks are trademarks of Ninebot (Tianjin) Technology Co., Ltd., which are protected by
laws, and no infringement allowed.
This manual is made by Ninebot (Beijing) Technology Co., Ltd. and have copyright, without written approval of Ninebot
(Beijing) Technology Co., Ltd., any unit or individuals shall not use, copy, change, record, spread or attached to other
products for using and selling to any parts of this manual.
This manual has covered various function introductions and using instruction as far as possible on printing. However, as
the products are perfecting constantly, design is changing, this manual may not be conforming to the products
purchased totally. Please scan the APP QR code on back cover to download APP that is suitable for Android or iOS
system and read the latest electric edition manual. Based on the updating of products, this manual may have deviations
on color, appearance and other aspects of actual products, and please refer to the actual products.
10. Name and content of harmful substances in the product
11. Trademark and legal statement
Entrusting party: MI Communication Technology Co., Ltd.
Manufacturer: Ninebot (Changzhou) Technology Co., Ltd.
Address: F16-17, Building A, Building 3, R & D Hub, Changzhou Science & Education Town, No. 18, Middle Changwu
Road, Wujin District, Changzhou City
Product executive standard: Q/320412NCZ002-2016
Harmful substances
: It means that the content of this harmful substance in all homogenic materials for this part is under the limitation requirements of GB/T 26572.
This form is prepared according to the rules of SJ/T 11364.
: It means that the content of this harmful substance in at least a certain homogenic materials for this part is over the limitation requirements of GB/T 26572.
Charger
Battery
Air jet
Charging mouth
Main control board
Instrument circuit board
In-wheel motor
Frame
Tire
Part name
(Pb)
Lead
(Hg)
Mercury
(Cd)
Cadmium
(Cr(VI))
Chromium
VI
(PBB)
Polybrominated
biphenyls
(PBDE)
Polybrominated
diphenyl ethers
9. Model parameter table
[1] Height of scooter: the distance from the ground to the highest point of the scooter.
[2] Typical endurance: it is measured under full charged condition, with 75kg load, under 25
℃
, on flat road without wind, in the speed of 15km/h
under energy-saving mode; the actual endurance will be different due to load, temperature, wind speed, road condition, operation habit and
other factors.
Note: Data and parameters are different for different model electric scooter. It is subject to change without prior notice.
Performance
indicator
Items
Product size
Product weight
Main parameters of
the whole scooter
Parameter of battery
Motor parameters
Charger parameter
L x W x H [1] (cm)
After folding: L x W x H (cm)
Maximum load (kg)
Riding requirements
Applicable age (year)
Applicable height (cm)
Highest speed (km/h)
Typical endurance [2] (km)
Maximum gradeability (
％
)
Working temperature (
℃
)
Storage temperature (
℃
)
Protective level
Applicable terrain
Highest charging voltage (VDC)
Rated capacity (Wh)
Intelligent battery management
system
Rated input voltage (VAC)
Rated output voltage (VDC)
Rated current (A)
Product certification
Rated voltage (VDC)
Rated power (W)
Rated power (W)
Largest power (W)
Charging time (h)
Parameter of electric scooter
108×43×114
108×43×49
100
About 30
About 14
36V
-10
―
40
-20
―
45
42V
280
250
500
Abnormal temperature/short circuit/under voltage automatic dormancy/double
over charge/double over discharge protection
100
―
240V ~
42V
1.7
71
16
―
50
120
―
200
IP54
Cement, asphalt road, flat soil road, stair no higher than 1cm, ditch no wider than
3cm
About 25
CCC
，
RoHS
About 5
Weight of the whole scooter (kg)
About 12.5
