MLP2 User Manual
18
①
When you select "Density" item, press the FEED button and you can change the data bit
setting from 0~9 by POWER button, press and hold the FEED button to save and exit.
②
When you select "St by Time" item, press the FEED button to move cursor and press the
POWER button you can change the data bit setting from 0 to 9, press and hold the FEED button
to save and exit.
③
When you select "Auto Shut Time" item, press the FEED button to move cursor and press the
POWER button you can change the data bit setting from 0 to 9, press and hold the FEED button
to save and exit.
④
When you select "Paper Type" item, 0 means Lable , 1 means Receipt, press the POWER
button you can change the data bit setting, press and hold the FEED button to save and exit.
⑤
When you select "Back Y Offs" item, press the FEED button to move cursor and press the
POWER button you can change the data bit setting from 0 to 9, press and hold the FEED button
to save and exit.
⑥
When you select "Factory Reset" item, you should input password, press the FEED button to
move cursor and press the POWER button you can change the data bit setting from 0 to 9, press
and hold the FEED button to save and exit.
⑦
When you select "Password" item, you should input original password(0000), press the FEED
button to move cursor and press the POWER button you can change the data bit setting from 0
to 9, press and hold the FEED button to save, then you can set a new password.
⑧
When you select "Prior Menu" item, press the FEED button you can go back to main menu.
4. When you select the ”Update FMW” of the main menu you can update firmware.
5. When you finished the parameter settings of the second level menu, select “Prior Menu”.
After back to main menu, you can select "Exit Menu" or long press POWER button to go to
icon mode.
