Xiamen Hanin Electronic MLP2, User Manual

Page: 20 / 25

MLP2 User Manual
16
3.8 Menu Operation
Main Menu Second Level Menu Third Level Menu Description
Self Test
Print --
Press the FEED button and then you
can print self-test.
Prior Menu --
Press the FEED button and then you
can go back to main menu.
System
Setup
Density
Density:
5
Press the POWER button and you can
change the data bit setting, press and
hold the FEED button to confirm.
St by Time
St by Time
(s):
0180
Press the FEED button to move cursor
and press the POWER button you can
change the data bit setting, press and
hold the FEED button to confirm.
Auto Shut Time
Auto Shut Time
(s):
7200
Press the FEED button to move cursor
and press the POWER button you can
change the data bit setting, press and
hold the FEED button to confirm.
Paper Type
Paper Type:
0-L
1-R
1
Press the POWER button you can
change the data bit setting, press and
hold the FEED button to confirm.
Back Y Offs
Back Y Offs:
(dot)
040
Press the FEED button to move cursor
and press the POWER button you can
change the data bit setting, press and
hold the FEED button to confirm.
Factory Reset
Input Pwd:
0000
Press the FEED button to move cursor
and press the POWER button you can
change the data bit setting, press and
hold the FEED button to confirm.
Password
Original Pwd:
0000
Press the FEED button to move cursor
and press the POWER button you can
change the data bit setting, press and
hold the FEED button to confirm.
Prior Menu --
Press the FEED button you can go
back to main menu.
Update
FMW
Update FMW?
0-N 1-Y
0
--
Press the POWER button you can
change the data bit setting, press and
hold the FEED button to confirm.
Exit Menu Press the FEED button you go back to icon menu.
NOTE : When you enter the menu mode, whatever the location, you can press and hold the
POWER button to cancel the current configuration and go to next higher level. If you press and
hold the POWER button you can exit menu mode and go back to icon menu.