240 S Pineapple Ave, Ste 701, Sarasota, FL-34236
Tel: (941) 954-8701 Fax: (941) 954-8595
5
AC Power Port:
AC Power: The device operates of 110V/220VAC; 50/60Hz and single-phase AC power
line. The device is connected to the AC power line5 using a standard 3-prong power
connector. This is shown in the following pictures:
Figure 3: Power Connector and Rear Toggle Switch
The Toggle switch on the rear end (near the power connector) is the main switch. This
switch is used to turn ON and turn OFF the device.
The device has a second Toggle switch installed at the front of the device. This is shown
in the following picture:
Figure 4: BTS Front View with Front Toggle Switch
In a typical rack mount installation, access to the rear side is sometimes difficult. So the
Toggle switch in the front is used to turn the device ON and OFF.
To turn ON the device, both the rear and front switch has to be in the ON position (This
is labeled ‘1’ on the switch). The device is turned OFF when either of the switches is
flipped to OFF position (labeled as’0’ on the switch).