xG Technology xMax BSN200-3S Operation Manual Download

Page: 2 / 10

Table of Contents

Introduction ....................................................................................................................... 2

Physical Device .................................................................................................................. 3

AC Power Connector ........................................................................................................ 4

Antenna Ports .................................................................................................................... 5

LEDs on the Ethernet Port .............................................................................................. 6

Front Panel Status Indicators .......................................................................................... 7

Powering ON the xMax BSN200-3S ................................................................................ 8

Powering OFF the xMax BSN200-3S .............................................................................. 8

Technical Support ............................................................................................................. 9

Certification ....................................................................................................................... 9

Technology

Proprietary and Confidential Information

Summary of Contents for xMax BSN200-3S










