Powering ON the xMax BSN200-3S
Follow the following steps to turn on the device:
1- Toggle the front and rear switch in the OFF position.
2- Connect the coaxial cable from the antenna to the antenna ports.
3- Connect the Ethernet cable to the Ethernet Port.
4- Connect the power cable to the AC (110V main line), first on the BSN side, then
into the outlet
5- Flip the rear power switch in the ON position.
6- Flip the front power switch in the ON position.
At this time, you will hear fans running inside the device and you will notice the left most
LED turn green. The device is powered ON.
Powering OFF the xMax BSN200-3S
Follow the following steps to turn OFF the device:
1- Flip the front toggle switch in the OFF position. The fans inside the unit will stop
and the Green LED (the left most LED in the Status Indicator) will be changed to
RED. The device is turned OFF.
2- To turn off the power supply, flip the rear toggle switch in the OFF position. The
RED led will turn OFF, indicating the device is completely turned OFF.
xG
Technology
Proprietary and Confidential Information
8
