The 845PE-ANT MAINBOARD
Page 8
Connectors
!
Two IDE connectors.
!
One floppy drive interface supports up to two 2.88 MB floppy drives.
!
One 20-pin ATX power supply connector.
!
One 4-pin (2x2) 12V ATX power supply connector
!
One 4-pin (1x4) ATX Auxiliary power supply connector
!
CPU fan, power supply fan, chassis fan connectors.
!
One CD audio in connector.
!
One AUX-IN connector
!
One Front Audio connector
!
One WOL (Wake-On-LAN) connector
ATX Double Deck Ports (PC 99 color-coded connectors)
!
Two USB2.0 ports.
!
Two external DB-9 serial port connector: COM 1 and COM 2 (UART).
!
One SPP/ECP/EPP DB-25 parallel port.
!
One mini-DIN-6 PS/2 mouse port.
!
One mini-DIN-6 PS/2 keyboard port.
!
One GAME/MIDI port.
!
Three audio jacks: SPK-OUT, LINE-IN and MIC-IN.
PCI Bus Master IDE Controller
!
Two PCI IDE interfaces support up to four IDE devices.
!
The 845PE-ANT mainboard supports ATA/33, ATA/66 and ATA/100
hard drives.
!
PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to
16.6MB/sec.).
!
Bus mastering reduces CPU utilization during disk transfer.
!
Supports ATAPI CD-ROM, LS-120 and ZIP.
Introduction
USB Ports
USB allows data exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals. The 845PE-ANT
mainboard is equipped with six USB2.0 connectors. USB 1 and USB 2 are
external connectors. They can be found on the PC 99 ATX connector. The other
USB connectors are internal connectors and can be used to connect other USB
devices. (Cables for the internal connectors are sold separately).
!" #
