The 845PE-ANT MAINBOARD
Page 17
Hardware Installation
2.5.6. CD-IN/AUX-IN Connector
Connector: CN21 (CD-IN)/CN45 (AUX-IN)
Type: 4 pin un-housed
This 845PE-ANT mainboard has one CD-IN connector and one AUX-IN con-
nector. The CD-IN connector is used to connect the CD ROM audio out and
allows the system to receive audio input from the CD ROM. The AUX-IN con-
nector allows the system to receive signals from other audio devices like a ra-
dio or tape.
WOL
5V_SB
Ground
1 5V_SB
2 Ground
3 WOL
Top View of a WOL Connector
Front View of a WOL Connector
Right Channel
CD-IN / AUX-IN
Left Channel
CD-IN / AUX-IN
Ground
1 Left Channel CD/AUX-IN
2 Ground
3 Ground
4 Right Channel CD/AUX-IN
Top View of a CD/AUX-IN
Connector
Front View of a CD/AUX-IN
Connector
Ground
2.5.7. USB3, USB4, USB5 and USB6
Connector: CN30 (USB 3)/CN31 (USB 4)/CN32 (USB5)/CN38 (USB6)
Type: 5 pin
You already have two USB2.0 ports available, USB1 and 2 (see external con-
nectors). The internal USB connectors allow you to add on an optional kit to
expand the total number of USB ports available. The mainboard has four inter-
nal USB2.0 connectors (CN30/CN31/CN32/CN38). This enables you to use an
extra four USB devices. Cable for these additional connectors needs to be pur-
chased separately.
Note: The PIN assignment of the internal USB 2.0 connectors (CN30, CN31,
CN32 and CN38) are follow the specifications of Intel standard.
