FusionServer 2488H V6 Server
Technical White Paper
5 Hardware Description
2022-08-12
25
Indicator Description
Table 5-3
Indicators on the rear panel
Silkscreen
Indicator
Description
FlexIO card status
indicator
FlexIO cards support only orderly hot swap.
For details, see Table 5-4.
FlexIO card power
indicator
FlexIO cards support only orderly hot swap.
For details, see Table 5-4.
-
Data transmission
status indicator for
the management
network port
⚫
Off: No data is being transmitted.
⚫
Blinking yellow: Data is being
transmitted.
-
Connection status
indicator for the
management
network port
⚫
Off: The network port is not connected.
⚫
Steady green: The network port is
connected properly.
Health status
indicator
⚫
Off: The device is powered off or is
faulty.
⚫
Blinking red at 1 Hz: A major alarm has
been generated on the system.
⚫
Blinking red at 5 Hz: A critical alarm
has been generated on the system.
⚫
Steady green: The device is operating
properly.
UID indicator
The UID indicator helps identify and locate
a device.
⚫
Off: The device is not being located.
⚫
Blinking or steady blue: The device is
being located.
NOTE
You can control the UID indicator status by
pressing the UID button or using the iBMC.
-
PSU indicator
⚫
Off: No power is supplied.
⚫
Blinking green at 1 Hz:
−
The input is normal, and the server is
standby.
−
The input is overvoltage or
undervoltage.
−
The PSU is in deep hibernation
mode.
⚫
Blinking green at 4 Hz: The firmware is
being upgraded online.
⚫
Steady green: The power input and
output are normal.
