Store the battery/battery pack in a cool, dry place.
Stay away from children. If swallowed, contact doctor immediately.
Avoid sealing the battery compartment and ensure ventilation
※
Rechargeable battery maintenance instructions
Periodic charge and discharge: If the unit is not used for a long time (when the battery is stored for more than 6 months), it is
recommended to do it once for the Stim Unit.
7. FAQ & Troubleshooting
Q1. What should I do if the electrical stimulation intensity is weak?
A. -Adjust the placement position.
-Adjust the electrical stimulation intensity through the Stim Unit or APP software.
-If the Stim Unit is running low, please charge it in time.
-Wet the skin and increase the electrical conductivity between the electrode and the skin.
Q2. After turning on the training mode or gait mode on the unit, although the indicator light is on, there is no electrical stimulation
reaction.
A. -Check if the Stim Unit is tied and close to the skin.
-Check if the current intensity set by the Stim Unit is adjusted to the appropriate intensity.
-Add some water to the surface of the electrode sheet to increase the conductivity of the electrode sheet.
Q3. What should I do if the skin in the area covered by the electrode and the Stim Unit band is severely red, stinging or allergic?
A. Stop using it immediately. After observing for a period of time, if no abnormality is found, wait until the skin is completely
improved before continuing to use the device. Remember to regularly ventilate the skin covered by the Stim Unit.
Q4. The unit display battery icon is turned off after 1 second interval flashing.
A. This indicates that the Stim Unit is running low and needs to be recharged. It takes about 3 hours for the unit to charge; after
the battery is fully charged, the unit can last for about 10 hours. When the battery is low, please charge it in time.
Q5. The Stim Unit LED light flashes quickly, what should I do if the main unit display “
”, “TBD Icon” flashes alternately?
A. This indicator is a reminder that the electrode is off. Please check if the Stim Unit is fastened. Or the skin is too dry and needs
to moisturize the skin. After re-fixing to the leg, press the main power stimulation adjustment button or press the stimulation
adjustment button in APP software to continue.
Q6. What happens when there is sporadic strong electrical stimulation?
A. -The surface of the electrode is not wet enough to sprinkle some water on the surface.
-Check if the skin in the area covered by the electrode is red or has a wound.
-Check if the cuff of the main unit is loose and the position of the electrode is accurate.
Q7. Why is there no electrical stimulation at the time of electrical stimulation?
A. Usually because the cuff position has been moved or the gait mode has changed. Please wear the cuff again or reset the
walking parameters.
Q8. Can I use oil or lotion on my legs?
A. No, please make sure the skin is clean before using the device and fully wet the adhesive surface of integrated electrode.
8. Product Configuration
8.1 Product specifications
Communication method: Bluetooth 4.0