Accessed
Lit yellow when the panel is in access level 2 or 3
General disablement
Lit yellow when one or more zone, sounder, output or relay is disabled
Phased evacuation
Flashes yellow when there is a phased evacuation in process
General fault
Flashes yellow when there is a fault condition on the panel. Will always
be lit in conjunction with at least one other fault LED
Power supply fault
Lit yellow when the panel’s power supply or mains has failed or the panel’s
standby battery is in poor condition
System fault
Lit yellow when a system error, such as a microprocessor fault, occurs. Remains
lit even if the panel automatically clears the fault
Sounder status
Flashes yellow if there is a faulty sounder or a sounder disablement anywhere
on the system
Delays
Lit yellow when one or more output delays have been programmed into the panel.
Flashes yellow when one or more output delay is running.
Button controls
More Information
Displays additional information on any fire, pre-alarm or fault conditions
that appear on the panel’s display
Silence Internal Sounder Silences the panel’s internal sounder
Menu
Provides access to the panel’s user menus
Scroll up / down
Dependent on the status of the panel, these buttons:-
56
• scroll vertically through any fire, pre-alarm or fault conditions that appear
on the panel’s display
• scroll vertically through the panel’s user menus
• manipulate date, time and disablement settings, etc
• serve as code input buttons to access levels 2 or 3
Escape / accept
Dependent on the status of the panel, these buttons:-
34
• scroll horizontally through the panel’s user menus
• escape or accept options available in the panel’s user menus
• serve as code input buttons to access levels 2 or 3
Silence / Resound Sounders Silences or resounds the system’s sounders (access levels 2 & 3 only)
Control Panel Reset
Resets the panel when the sounders are silenced (access levels 2 & 3 only)
Investigate
Starts the panel’s investigate timer function (access levels 2 & 3 only). Only
available if the panel’s investigate timer function has been enabled by an
engineer.
Keyswitch control (if fitted)
Turning the keyswitch to the armed position gives the user instant access
to access level 2 (authorised user level).
XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 7 of 28
XFP NETWORKABLE ANALOGUE ADDRESSABLE FIRE ALARM PANEL
