Change the access level 2 code
This function allows you to change the four digit code needed to activate the panel’s access level 2
menu options. When selected, press the accept
6
button and the following window will appear:
Using the
5
(1)
4
(2)
6
(3)
3
(4) buttons, enter the new four digit access level 2 entry code. After the
fourth digit has been entered, the panel will request you confirm the new code by re-entering it.
Enter the code again by pressing the
5
(1)
4
(2)
6
(3)
3
(4) buttons in same sequence. If the two
codes match, the panel will accept the code and you will be taken back to access level 2. If you type
an incorrect confirmation code you will be prompted to start the new code entry sequence again.
BE SURE TO KEEP A RECORD OF THE NEW CODE ON PAGE 20 OF THIS USER MANUAL.
Although the CHANGE ACCESS LEVEL 2 CODE menu option IS available on keyswitch versions of
the panel, any changes to the code WILL NOT affect the panel’s operation, i.e. access to the panel’s
authorised user menu will still be available via the panel’s keyswitch.
XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 19 of 28
XFP NETWORKABLE ANALOGUE ADDRESSABLE FIRE ALARM PANEL
Enter NEW Access Level 2 Code
Enter NEW Access Level 2 Code: ****
Confirm NEW Access Level 2 Code:
