Copyright © 2019 Xflight Technologies LLC, Florida, USA
9
3.
AUTOPILOT / TRIM and Flight Controller Wiring
The Flight Controller, AUTOPILOT and TRIM System all need to be on a separate switched and fused
(5A) circuit to the servo(s) circuit. They need to be powered up at the same time. The AUTOPILOT /
TRIM circuit always needs to be switched on before the servo(s) circuit.
The Trim switch wiring is also shown here. There is a common ground wire and one wire each for
pitch up, pitch down, roll up and roll down switches. The wires are labelled accordingly.
