XETEC GRAVITY MK2 SERIES G-500 / G-1200
Congratulations for buying this
XETEC
product and thank you for your
confidence! With this
XETEC
amplifier you have purchased an innovative
and professional high-end product, which will enable you to enjoy your
music on a very high quality level for many years. We have especially focused
on electronic as well as product design to give you a product that will
accompany you for many years, as our products are always one step ahead
and will still be modern for many years.
XETEC
products represent the experience our engineers have made through
many years assisted by car audio magazines as well as professional installers.
Please read these instructions very carefully, to avoid unnecessary trouble
and defects.
In case of trouble, please contact your local dealer or check our website
www.xetec.de
for troubleshooting. There we also offer up-to-date tech-
tips and technical support for you.
The
XETEC G-500 / G-1200
is a state-of-the-art mono car audio subwoofer
amplifier, especially developed for top quality subwoofers. A perfect choice
are the
XETEC
subwoofers.
The versatility and many adjustment options make the
G-500 / G-1200
an allround genius to drive one or more subwoofers.
SPECIAL FEATURES
•
Remote BLC: The
XETEC
Bass Level Controller enables you to adjust
your subwoofer level from the dash. Use of a VCA (Voltage Controlled
Amplifier circuit) makes this option a high end feature.
•
Parametric EQ: The built-in Parametric Equalizer was engineered for
correction of the vehicle´s own acoustic properties and thus can enhance
the sound quality significantly.
•
The subsonic filter is able to filter out very low frequencies, which can
hardly be heard, but need a lot of energy. So cone excursion is reduced
and energy is saved which now can be used for the audible
spectrum of the music. The sound becomes clearer and more stable.
•
Phase adjust can be used to get the subwoofer acoustically back to the
front systems by compensation of the delay between front speakers
and subwoofer.
•
Protection circuits: Overload, Short-circuit, DC, Overheat.
SAFETY
•
Before you make any connection, the battery must be
disconnected!
•
A main fuse must be installed into the +12 V wire within the
first 12" from the + terminal of the battery (insurance
regulation!).
•
Please note that a minimum speaker impedance of 2 Ohms
must be maintained. Do not connect speakers with lower
impedance in normal as well as in bridged mode!
•
Make sure that you do not use defective speakers and
subwoofers. They can cause damage to your amplifier!
The fuses inside the amplifier only protects the device itself, not the battery
and the car!
1
CAUTION
This product is capable of conducting very high sound pressure
levels, and can thus be harmful to your health. Prolonged exposure
to high volume levels can cause hearing loss! Please use restraint
on the volume control. XETEC wants you to enjoy your amplifier
for a long time to come, and we do not take responsibility for
hearing loss nor other health problems.
