![background image](http://html1.mh-extra.com/html/xerox/workcentre-xk35c/workcentre-xk35c_user-manual_4291549076.webp)
Troubleshooting
61
Printer Problems
Symptom
Cause and Solution
The printer does not
print.
Q
The USB or parallel cable is not
connected properly.
Q
The USB or parallel cable is defective.
Swap the cable with one known to work.
If necessary, replace the cable.
Q
If using a parallel cable, ensure that it is
compliant with the IEEE 1284 standard.
Q
The printer port is configured incorrectly.
Check Printer Setting in Windows to
make certain that the print job is being
sent to the correct port (for example,
LPT1).
Q
A paper jam has occurred. See Section
6
Troubleshooting/Clearing Jams.
Q
The printer may be configured incorrectly
within the PC application. Check the
application to verify that all print settings
are correct.
Q Q
The printer driver may be
incorrectly installed. Remove the
existing printer driver, and re-install the
printer driver. See Section 1
Getting
Started/Uninstalling Software. Try
printing a test page.
The paper does not feed
into the printer.
Q
Paper has not been loaded properly.
Remove and re-insert the paper
correctly. See Section 1
Getting
Started/Loading Paper.
Q
There is too much paper in the Automatic
Paper Feeder. Remove some paper.
ª
Summary of Contents for WorkCentre XK35c
