2.13
U s e r G u i d e
P O W E R R E D U C T I O N S
2
Power Reductions
There are two modes of power reduction:
Power Save
, and
Power Shut-off
.
Power Save
In this mode, the fuser is maintained at a
lower heat level, thereby saving power. The
Ready Indicator will flash and the other
indicators will remain on. To copy, press
Start
. The copies will be made automatically.
Power Shut-Off
This mode saves more power than the Power
Save Mode, but requires more time before
copying can begin. When the copier enters
the power shut-off, the Ready Indicator will
flash and the other indicators will turn off. To
copy from the power shut-off, press the
Start
button, then select the desired features and
press
Start
again.
Auto Clear
This XE90fx is enabled at the factory to return
to the Normal Copy mode approximately one
minute after a job is completed.
•
Copy Quality - Auto
•
Copy lighter/darker - Normal
•
Priority Magnification - 100%
•
Quantity Selected - 1
Note: Time periods for the Power Shut-
Off, Power Save, and Auto Clear can be
modified to meet your specific copying
needs. Refer to the Programmable
Features Settings section of this User
Guide for information about changing
these settings.
XE90QRG.BK Page 13 Wednesday, January 5, 2000 9:55 AM
