Verifying Network Setup Using CentreWare Internet Services (CentreWare IS)
Xerox WorkCentre M118/M118i
4
Set the Gateway Address
1.
Press the
Select
button until you see
Gateway Address
on the display,,
and then press the
Enter
button.
2.
Use the numeric key pad to enter the first number of the gateway address, and then press the
Right Arrow
button to move to the next field.
3.
Repeat Step 2 to enter the remaining numbers.
4.
Press the
Enter
button to accept the address.
5.
Press the
Exit
button.
Set the Subnet Mask
1.
Press the
Select
button until you see
Subnet Mask
on the display,,
and then press the
Enter
button.
2.
Use the numeric key pad to enter the first number of the subnet mask, and then press the
Right Arrow
button to move to the next field.
3.
Repeat Step 2 to enter the remaining numbers.
4.
Press the
Enter
button to accept the subnet mask.
5.
Press the
Exit
button.
6.
Press the
Log In/Out
button to return to the main menu.
7.
Use CentreWare IS to set the DNS server address. See
Verifying Network Setup Using
CentreWare Internet Services (CentreWare IS)
on page 4.
Verifying Network Setup Using CentreWare Internet
Services (CentreWare IS)
CentreWare IS provides a simple interface that enables you to manage, configure, and monitor networked
printers from your desktop using an embedded web server. CentreWare IS gives administrators easy access to
printer status, configuration, and diagnostic functions. It also provides users with access to printer status and
special printing functions such as printing saved jobs. With CentreWare IS software, you can access and
manage your printers over a TCP/IP network using a web browser.
Note
To enter network configuration settings via CentreWare IS, your computer must be on the same subnet as
the Xerox WorkCentre M118/M118i. For additional information about using CentreWare IS, see the
User Guide
and the
System Administration Guide
.
To verify your network setup using CentreWare IS:
1.
At your computer, launch your web browser.
2.
Enter the machine’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click the
Properties
tab.
4.
Select the
Protocol Settings
folder on the left sidebar, and then select
TCP/IP
.
