Network Setup Using a Static IP Address
Xerox WorkCentre M118/M118i
3
Network Setup Using a Static IP Address
When the machine is powered on, it automatically uses DHCP to obtain its network configuration. To use a
static IP address, DHCP must be turned off and the IP address, gateway address, subnet mask, and
DNS Server address must be entered manually.
Pre-requisites for Using a Static IP Address
Before you begin, obtain the following information from your network administrator:
Connecting the Machine Using a Static IP Address
1.
Turn on the machine.
2.
When the machine is Ready, press the
Log In/Out
button.
3.
Press the
Select
button below the display to select
System Settings
.
a.
Use the numeric keypad to enter the
Password
. The default password is
11111
.
b.
Press the
Select
button to select
Confirm
.
Turn DHCP Off
1.
Press the
Select
button to highlight
Print Settings
,
and then press the
Enter
button.
2.
Press the the
Enter
button to select
Network/Port
.
3.
Press the
Select
button until you see
TCP/IP Settings
on the display, and then press the
Enter
button.
4.
Select
Get IP Address
,
and then press the
Enter
button.
5.
Select
Manual
,
and then press the
Enter
button.
6.
Press the
Exit
button.
Set the IP Address
1.
Press the
Select
button until you see
IP Address
on the display,,
and then press the
Enter
button.
2.
If there is an incorrect IP address in the field, press the
Clear
button to delete the address.
3.
Use the numeric key pad to enter the first number of the IP address, and then press the
Right Arrow
button
to move to the next field.
4.
Repeat Step 3 to enter the remaining numbers.
5.
Press the
Enter
button to accept the address.
6.
Press the
Exit
button.
IP Address:
__________ . __________ . __________ . __________
Gateway Address:
__________ . __________ . __________ . __________
Subnet Mask:
__________ . __________ . __________ . __________
DNS Server Address:
__________ . __________ . __________ . __________
