dc10cc0465
Customer Support
Page 15
STAPLE
This command indicates use and location of staple(s).
PJL COMMENT Command
PS SET Page
@PJL COMMENT XRXSTAPLE=
string
;
/Staple
int
/StapleDetails<</Type 1
/StapleLocation(“
string
”)
Where
string
is:
PORTRAIT
LANDSCAPE
DUAL
Where
int
is:
0 = No Staple
3 = Staple at end of set
Where
string
is:
SinglePortrait
SingleLandscape
DualLandscape
Multiple
The following command indicates use of a multiple staples (4).
@PJL COMMENT OID_ATT_FINISHING
OID_VAL_FINISHING_STAPLE_MULTIPLE;
HOLE PUNCH
This command indicates hole punches for a print job on a device with hole punch capability.
PJL COMMENT Cmd
DSC Comment Cmd
PS Cmd
@PJL COMMENT
OID_ATT_PUNCH
int
;
%%OID_ATT_PUNCH
int
; <</Punch
int1
/PunchDetails <</Type 6 /NumHoles
int2
>>>>
Where
int
is:
0 = Punch Off
1 = Punch On
2 = Use 2 Hole Punch
3 = Use 3 Hole Punch
4 = Use 4 Hole Punch
Note:
int
1 will be emitted to invoke the default punch
setting on the device.
Note: Setting NumHoles to 1 causes a punch with the
default number of holes.
Where
int1
is:
0 for Punch Off
4 for Punch On after each showpage or copy page
operation.
Where
int2
is:
0 = Punch Off
1 = Punch On
2 = 2 Hole Punch
3 = 3 Hole Punch
4 = 4 Hole Punch
Note: Setting NumHoles to 1 causes a punch with the
default number of holes.
