Xerox WorkCentre 7132, User Manual, Page: 67 / 72

5 Operation on Macintosh Computers
Xerox WorkCentre 7132 PostScript® User Guide 67
Feed Separators from - Specifies the paper tray that transparency separators are
to be fed from. When [Auto] is selected, the tray set on the machine is used as the
feed destination.
Print on Separators - Specifies whether to print on the transparency separators as
well as the transparency.
Paper Type (Separators) - Specifies a paper type for the transparency divider.
Installing the Screen Fonts
This section explains how to install the fonts in the Screen Font folder.
It is recommended that all other applications are closed before installing the fonts.
Otherwise, a warning message appears between steps 5 and 6.
1.
Start Macintosh and insert the PostScript Driver Library CD-ROM into the CD-
ROM drive.
2.
Double-click the [WorkCentre-PS] icon followed by the Screen Font folder and
then the [PS3 Fonts Installer].
3.
When the Installer window appears, click [Continue].
The license agreement dialog appears.
4.
Read through the agreement carefully and if you have no objections to it, click
[Accept].
The PS3FontsInstaller dialog box appears.
5.
You may select [Easy Install] or [Custom Install].
Easy Install - installs all the fonts provided in the Screen Font folder.
Custom Install - installs the selected fonts only. Simply click on the disclosure
triangle beside the four categories of fonts to display the fonts in each category and
then check the fonts to be installed. For example, the diagram below shows that
Arial CE of the CE TrueType fonts is selected.
A warning message will appear if you did not quit all other applications before
performing the font installation.