Xerox WorkCentre 7132, User Manual

Page: 55 / 72

5 Operation on Macintosh Computers
Xerox WorkCentre 7132 PostScript® User Guide 55
Installation Procedure (Mac OS X)
This section describes how to install the PostScript Printer Description (PPD) file for the
Macintosh operating system, Mac OS X v10.3.x.
NOTE: A printer driver does not need to be installed on Mac OS X. It uses the Adobe
PostScript driver that is provided with the operating system.
1.
Insert the PostScript Driver Library CD-ROM in the CD-ROM drive.
The WorkCentre-PS icon appears on the desktop.
2.
Double-click [WorkCentre-PS].
The WorkCentre-PS window opens.
3.
Open the [Mac OS X] folder.
The Mac OS X window opens.
4.
Double-click [Xerox Installer].
The installer starts and the Authenticate window opens.
5.
Enter the Administrator’s user name and password, then click [OK].
The Xerox Installer screen opens.
6.
Click [Install] to start the installation.
7.
Read through the license agreement carefully and if you have no objections to it,
click [Accept].
8.
Confirm the Install Location and change it if necessary, then click [Install].
9.
When the dialog box showing installation has completed appears, click [Quit].
This completes the installation.
Proceed to
Adding a Printer (Mac OS X) on page 55 .
Adding a Printer (Mac OS X)
After the PPD file has been installed, set the PPD file for the printer driver, and then
add the printer. The printer driver controls the printer functions based on the information
in the PPD file.
1.
Make sure that the machine is on.
2.
Check that the machine’s port is set to Enable.
– When using AppleTalk, set the EtherTalk port to Enable.
– When using IP Printing, set the LPD port to Enable.
You can check the EtherTalk and LPD settings in the System Settings List. See the
User Guide for details about how to print the “System Settings List.”
3.
Start [Printer Setup Utility].
NOTE: You can find Printer Setup Utility in the Utilities folder in the Applications folder.