manualshive.com logo in svg

Xerox WorkCentre 5222, Service Manual

The Xerox WorkCentre 5222 is a high-performance multifunction printer designed for efficient and seamless office productivity. For quick and hassle-free network setup, you can easily access the comprehensive Quick Network Setup Manual available for free download from our website. Take full advantage of this user-friendly manual to enhance your printing experience.

Share
Download
background image

February, 2008

1-3

WorkCentre 5225, 5230

Service Call Procedures, Initial Actions

Service Call Procedures

Launch Version

 

Service Call Procedures

Service Strategy

The service strategy for the WorkCentre 5225/5230 is to perform any High Frequency Service 
Item (HFSI) actions before attempting to repair any problems. Some problems will be corrected 
by this strategy without the need to diagnose them. The Repair Analysis Procedures (RAPs) 
will be used for any remaining problems.

Problems that occur in the Basic Printer mode will be repaired before problems that occur 
when using the accessories.

Image Quality problems should be repaired after all other problems are repaired.

Service Call Procedures

The  Service Call Procedures are a guide for performing any service on this machine. The 
procedures are designed to be used with the Service Manual. Perform each step in order.

Initial Actions

The 

Initial Actions

 gather information about the condition of the machine and the problem that 

caused the service call.

Call Flow

Call Flow

 summarizes the sequence of the Service Call Procedures. 

Detailed Maintenance Activities

Detailed Maintenance Activities

 section provides the information needed to perform the High 

Frequency Service Item (HFSI) actions.

Cleaning Procedures

The 

Cleaning Procedures

 list what needs to be cleaned at each service call.

Final Actions

The 

Final Actions

 will test the copier/printer and return it to the customer. Administrative activi-

ties are also performed in the Final Actions.

Initial Actions

Purpose 

The purpose of the Initial Action section of the Service Call Procedures is to determine the rea-
son for the service call and to identify and organize the actions which must be performed. 

Procedure

1.

Gather the information about the service call and the condition of the copier/printer.

a.

Question the operator(s). Ask about the location of most recent paper jams. Ask 
about the image quality and the copier/printer performance in general, including any 
unusual sounds or other indications. 

b.

After informing the customer, disconnect the machine from the customer’s network.

c.

Check that the power cords are in good condition, correctly plugged in the power 
source, and free from any defects that would be a safety hazard. Repair or replace 
the power cords as required. Check that the circuit breakers are not tripped. 

d.

Inspect any rejected copies. Inquire as to, or otherwise determine, the paper quality 
and weight, the specified paper for optimum Image Quality, 24# Xerox Color Expres-
sions (NASG) or Co90gsm (ESG). Look for any damage to the copies, oil 
marks, image quality defects, or other indications of a problem. 

e.

Record the billing meter readings. 

f.

Access Diagnostic Routines.

i.

Enter UI Diagnostics (Entering UI Diagnostics in 

UI Diagnostic Mode

).

ii.

Access Diagnostic Routines (Accessing Diagnostic Routines in 

UI Diagnostic 

Mode

).

NOTE: If a fault code is displayed while performing a diagnostics procedure, go to 
that fault code RAP and repair the fault. Return to Diagnostics and continue with the 
dC procedure that you were performing. 

g.

Print the HFSI Report and determine what HFSI action is required based on the cus-
tomer output volume. Refer to the 

Detailed Maintenance Activities

 section for the 

detailed HFSI information. Record any items that require action.

h.

Display and record the information in the Jam Counter, Fault Counter, and Shutdown 
History. Classify this information into categories: 

Information that is related to the problem that caused the service call. 

Information that is related to secondary problems. 

Information that does not require action, such as a single occurrence of a prob-
lem.

i.

Check the Service Log for any recent activities that are related to the problem that 
caused the service call or any secondary problem. 

2.

Perform any required HFSI activities identified above. Refer to the Detailed Maintenance 
Activities section. 

3.

Exit diagnostics. Try to duplicate the problem by running the same jobs that the customer 
was running.

4.

Check the Image Quality in the Basic Copier Mode. Select the tray that is loaded with 11 x 
17 or A3 paper, if unable to complete tray selection, go to 

Call Flow

. 

Set the copier/printer to the following setup:

•

Output Color - Auto

Summary of Contents for WorkCentre 5222


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WorkCentre 5222

Canon 1750 Service Manual preview
1750
Brand: Canon Pages: 358
EASYPRINT Compact CM User Documentation preview
Compact CM
Brand: EASYPRINT Pages: 37
Canon S 200 User Manual preview
S 200
Brand: Canon Pages: 198
Datamax MP-Compact4 Network Manual preview
MP-Compact4
Brand: Datamax Pages: 19
Oce im4530 Scanning Manual preview
im4530
Brand: Oce Pages: 136
Oce im4512 Facsimile Operation Manual preview
im4512
Brand: Oce Pages: 116
Pantum P3060 SERIES Manual preview
P3060 SERIES
Brand: Pantum Pages: 115
MAC TOOLS P 9300 Instruction Manual preview
P 9300
Brand: MAC TOOLS Pages: 2
Citizen iDP-3210 Service Manual preview
iDP-3210
Brand: Citizen Pages: 46
Sagem MF 5482 Instruction Booklet preview
MF 5482
Brand: Sagem Pages: 102
Lexmark Optra W810 Service Manual preview
Optra W810
Brand: Lexmark Pages: 489
Canon MP21D III Instructions Manual preview
MP21D III
Brand: Canon Pages: 11
Canon MAXIFY GX3070 Installing preview
MAXIFY GX3070
Brand: Canon Pages: 13
Canon Pixma iP1200 Quick Start Manual preview
Pixma iP1200
Brand: Canon Pages: 20
Canon imageRUNNER 717iFZ Getting Started preview
imageRUNNER 717iFZ
Brand: Canon Pages: 12
Canon TR7022a Getting Started preview
TR7022a
Brand: Canon Pages: 16
Canon imageRunner Advance 715iZF III Getting Started preview
imageRunner Advance 715iZF III
Brand: Canon Pages: 12
Canon S4500 - BJC Color Inkjet Printer Manual preview
S4500 - BJC Color Inkjet Printer
Brand: Canon Pages: 46

Brands by name

Popular brands

Load more brands