Xerox Wide Format 6204 Copy/Scan Operation Manual Download

Page: 161 / 226

System Administration Overview

Xerox 6204 Wide Format Solution

153

Sy
st

em
Ad
minis

tra

tion

Exiting the System Administration Mode

The procedure for exiting the System Administration mode is as follows.

Procedure

Select [Close] on the [System Administration]
menu.

The system will exit System Administration mode and the
default screen will display.

Note:

The default screen may be changed from the [Menu]
screen by selecting [Setup] > [Control Panel] >
[Default Screen], and selecting one of the available
options.

Summary of Contents for Wide Format 6204



































































































































































































































Search results

Summary of Contents for Wide Format 6204

Reviews:

Related manuals for Wide Format 6204

Brands by name

Popular brands

Xerox Wide Format 6204, Copy/Scan Operation Manual

Search results

Summary of Contents for Wide Format 6204

Reviews:

Related manuals for Wide Format 6204

Brands by name

Popular brands