The Square Fold feature can be selected or accessed from your computer print driver, the press user
interface, or the print server.
Note:
The term Book Pressing is used synonymously with the terms Square Fold or Square
Folding.
Square Fold Adjustment Settings
The square fold feature can be switched on or off based on user preference. When the feature is
switched on, you can select one of five options depending on your requirements for the finished
booklet job.
Note:
Run one or more test prints before running large jobs.
Number
Description
1
Select this setting (
-2 / Lower / Low 2
) when your finished booklet is five pages or
less and on lightweight paper (100 g/m
2
or lower). The least amount of pressure
that can be applied to the booklet is -2.
2
Select this setting (
-1 / Low / Low 1
) when you want less pressure applied to the
spine of the booklet. The less pressure applied to the booklet, the more rounded
the booklet spine will be.
3
Auto / Normal
is the default setting and is used for most jobs.
4
Select this setting (
+1 / High / High 1
) when you want a greater amount of
pressure applied to the spine of the booklet, but not as much as the +2 setting
uses.
5
Select this setting (
+2 / Higher / High 2
) when you want the most amount of
pressure applied to the spine of the booklet. The more pressure applied, the more
square the booklet spine will be. The greatest amount of pressure that can be
applied to the booklet is +2.
Xerox
®
Versant
®
4100 Press
User Documentation
217
Summary of Contents for Versant 4100 Press
