Xerox Versant 2100 Press, System Administration Manual

Page: 74 / 104

Table 1. Default Paper Width NVM Settings at Initial Installation
NVM De-
fault Value Paper Width (lower
/ upper limit) Media Size NVM Chain Link Number Range
Number
980 - 3302 98.0 - 330.2 mm All widths al-
lowed 501 - 860 (lower limit range) Fuser
Module
1
980 - 3302 98.0 - 330.2 mm 501 - 857 (upper limit range)
1800 - 2499 180.0 - 249.9 mm A3 SEF / A4 (XE);
Letter LEF /
11x17 (XC) 501 - 861 (lower limit range) Fuser
Module
2
2704 - 2980 270.4 - 298.0 mm 501 - 858 (upper limit range)
3000 - 3100 300.0 - 310.0 mm SRA3 (XE); 12 /
13 inches (XC) 501 - 862 (lower limit range) Fuser
Module
3
3070 - 3302 307.0 - 330.2 mm 501 - 859 (upper limit range)
Note
The following shows typical workflow examples of width sizes you may use and what
NVM settings you would select to calibrate the NVMs. Any ranges can be used. Each
value is calculated with + / - 5mm.
Table 2. Examples of Custom Paper Width Settings and their NVM Values
NVM Default
Value
(12in.=304.8mm)
(10in.=254mm) Paper Width
(lower /upper
limit) Media Size NVM Chain Link Number Range
Number
2490 lower > 249 mm 8 x 10 inches
(width is 10 in.) If range 2 is selected: 501 -
861 (lower limit range) 1, 2 or 3
In this ex-
ample,
Range 2
2590 upper > 259 mm 501 - 858 (upper limit
range)
2998 lower >
299.8mm 12 x 18 inches
(width is 12 in.) If range 3 is selected: 501 -
862 (lower limit range) 1, 2 or 3
In this ex-
ample,
Range 3
3098 upper >
309.8mm 501 - 859 (upper limit
range)
9. Select the Save button.
The NVM Read/Write window displays the entered value as the Current Value.
10. Select Close to save your new setting and return to the Tools window.
A “Reboot Machine” message displays.
Xerox ® Versant™ 2100 Press 6-18
System Administration Guide
Common Service Settings