Xerox Versant 2100 Press, System Administration Manual

Page: 44 / 104

Setting up Direct Connect
Depending on your network, you may need to change the HTTP Proxy server setting for
Remote Print Services. By default, the HTTP Proxy server is set to off. The settings can
be configured and set up in one of two ways:
• Directly at the press, through the Network and Connectivity tool
• Through the CentreWare Internet Services
When Remote Print Services is enabled, CentreWare Internet Services can be accessed
from any computer on the network that has a web browser, including the print server,
using the print server IP Address. You can use the CentreWare Internet Services interface
to define the site’s HTTP proxy server settings and data transfer information.
The following describes how you set up the communication between the networked
Xerox press and the Xerox communication print server for purpose of administering the
Remote Services.
How to Set Up Your Press
Network Access
Verify the press is physically connected to your network and is allowed internet access.
This press is designed to connect automatically through the print server and retrieve its
network information. However, if an internet proxy server is in use, you may need to set
up the proxy server on the press in order to allow communication to Xerox.
Set Up the Proxy Server
Your site’s network may require all internet access to pass through a proxy server. Verify
and obtain the IP Address (or host name) and port for the proxy server, and ensure the
proxy server is configured to allow outgoing HTTP (or secure HTTPS) protocol connections.
If the proxy server uses authentication, obtain the user name and password of an account
that provides access.
Xerox Remote Print Services is enabled by configuring the proxy server settings. This
registers the device with the Xerox Communication Server and sets the time for the
transmission of data.
Xerox ® Versant™ 2100 Press 4-2
System Administration Guide
Xerox Remote Print Services