Advanced Features and Troubleshooting Manual
33
Printer Management
■
PC:
■
SYSTART.PS
— Turns on automatic execution of the SysStart job
■
NOSYSTRT.PS
— Turns off automatic execution of the SysStart job
Refer to page 40 for downloading instructions.
To make the change take affect, reset the printer.
Manual feed timeout
When you select Manual Feed-Paper or Manual Feed-Transparency in the printer driver,
the front panel prompts you to add the sheet of paper or transparency. If you don’t insert
anything in the manual-feed slot, the printer waits for a specified time before attempting to
pick paper from one of the paper trays.
To change the manual feed timeout from the printer’s front panel:
1.
With
Menus
highlighted, press the
OK
key.
2.
Scroll to
Printer Setup Menu
by pressing the
Scroll Up
or
Scroll Down
key.
3.
Press the
OK
key.
4.
Scroll to
Set Manual Feed Timeout
.
5.
Press the
OK
key.
6.
Scroll until the desired number of seconds (0 to 999) is displayed. (If you select a
value of 0, the printer does not time out while waiting for paper to be inserted.)
7.
Press the
OK
key.
To change the manual feed timeout using CentreWare IS Printer Management software:
1.
From your printer’s Internet Services home page, click
Properties
.
2.
On the left side of the
Properties
page in CentreWare IS, click
Printer Defaults
.
3.
If desired, change the setting for
Manual Feed Timeout
(under
Timeout Settings
on
the
Printer Defaults
page). (Select a number from 0 to 65535 seconds; if you select a
value of 0, the printer does not time out while waiting for paper to be inserted.)
4.
Click the
Save Changes
button on the bottom of the page.
Front panel intensity
To make the front panel text more readable, you can adjust the intensity of the front
panel’s back lighting:
1.
On the front panel, with
Menus
highlighted, press the
OK
key.
2.
Scroll to
Printer Setup Menu
by pressing the
Scroll Up
or
Scroll Down
key.
3.
Press the
OK
key.
4.
Scroll to
Set Front Panel Intensity
.
5.
Press the
OK
key.
6.
Scroll until the desired back light intensity is displayed. The intensity values range
from 0 (no back light) to 10 (brightest back light).
