Xerox Phaser 860, Advanced Features And Troubleshooting Manual

Page: 13 / 74

Advanced Features and Troubleshooting Manual 7
Advanced Features
Note
Many applications have a collate option when you select
Print
in the
application. Collation done at the printer is faster than collation performed by an
application. For faster printing of a collated job, select collation in the printer
driver (as described below) and do not select collation in the application.
You can specify collation in a supported driver:
■
Windows 95 / Windows 98 PostScript driver:
On the
Output Options
tab, check the
Collate
checkbox.
■
Windows 2000 / Windows NT driver:
On the
Output Options
tab, check the
Collate
checkbox.
■
LaserWriter 8.6 or 8.7 driver:
In the Print dialog box, select the Advanced Media Handling pull-down menu, then
select whether to have Quick Collate on or off.
N-up
When printing a multiple-page document, you can choose to print more than one page on
a single sheet of paper. You can choose to print one, two, four, six, nine, or sixteen pages
per sheet. When you print more than one page on a sheet, you can also print a border
around each page.
You can select N-up in a supported driver:
■
Windows 95 / Windows 98 PostScript driver:
On the Setup tab, click the More Layout Options button, then choose the number of
pages per sheet in the More Layout Options dialog box.
■
Windows 2000 driver:
On the Layout tab, choose the number of pages per sheet from the drop-down list.
■
Windows NT driver:
On the Advanced tab under Document Options , select the desired Page Layout (N-up)
Option .
■
LaserWriter 8.6 or 8.7 driver:
In the Print dialog box, select the Layout pull-down menu, then select the number of
pages per sheet.